Ajout dela structure MDT dans Infra-LAB
This commit is contained in:
@@ -0,0 +1,254 @@
|
||||
<!DOCTYPE html>
|
||||
<html>
|
||||
<head>
|
||||
<meta charset="UTF-8">
|
||||
<title>readme</title>
|
||||
</head>
|
||||
<body class='bodyStyle'>
|
||||
<pre>
|
||||
--CONTENTS--<br>
|
||||
1 - Installation Instructions
|
||||
2 - Flash under Operating System
|
||||
3 - Flash Program Options
|
||||
4 - Flashing Back to an Older Level of BIOS
|
||||
5 - Delaying Reboot in BIOS Update
|
||||
6 - AMIDEWIN - AMI SMBIOS Editor for Windows
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 1. Installation Instructions *
|
||||
* *
|
||||
* Please print out these instructions or write them down before *
|
||||
* starting this flash update utility. *
|
||||
* *
|
||||
* This flash under operating system (32-bit/64-bit) utility provides *
|
||||
* the ability to update the system BIOS from a Windows application. *
|
||||
* *
|
||||
* The utility may be downloaded from the internet and unpacked into *
|
||||
* the default path: "C:\SWTOOLS\FLASH\xxxJYnnUSA", where "nn" *
|
||||
* represents the two-digit BIOS level. Please follow steps in *
|
||||
* section 2 to launch the Windows based flash application to update *
|
||||
* your system BIOS. *
|
||||
* *
|
||||
* The utility is built by Inno Setup Compiler 5.5.9(u) *
|
||||
* *
|
||||
*****************************************************************************
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 2. Flash Under Operating System *
|
||||
* *
|
||||
* 1. Please make note of any settings you have changed in the BIOS *
|
||||
* Setup utility. They may have to be re-entered after updating *
|
||||
* the BIOS. *
|
||||
* *
|
||||
* 2. Click on the Start button and type cmd.exe, Right-click on *
|
||||
* the cmd.exe application and select run as administrator to *
|
||||
* open the Command Prompt with Administrator privilege. *
|
||||
* *
|
||||
* 3. In the "Command Prompt" window, change to the directory where the *
|
||||
* above files were extracted. The command to go to the location is *
|
||||
* "cd C:\SWTOOLS\FLASH\xxxJYnnUSA", where "nn" represents the two *
|
||||
* digit flash level. *
|
||||
* *
|
||||
* 4. Enter the command "flash.cmd" and press the Enter key to start *
|
||||
* the flashing process. *
|
||||
* *
|
||||
* 5. You may first see a confirmation prompt "Proceed with BIOS *
|
||||
* update now?". Click "Yes" to continue. *
|
||||
* *
|
||||
* 6. You will see the prompt "Would you like to update the Serial *
|
||||
* Number?". Input "n" and press Enter. *
|
||||
* *
|
||||
* 7. Then you will see the prompt "Would you like to update the *
|
||||
* Machine Type and Model?". Input "n" and press Enter again. *
|
||||
* Then the BIOS update process will start. *
|
||||
* *
|
||||
* 8. The update may take up to 2 minutes. Do not power off or restart *
|
||||
* the system during this procedure! After the Windows update *
|
||||
* process ends, the system will automatically reboot to continue *
|
||||
* the flash process. *
|
||||
* *
|
||||
* 9. After the system reboots, the BIOS update process will continue *
|
||||
* with a simple graphic UI. When the BIOS update process ends, *
|
||||
* the system will reboot automatically. *
|
||||
* *
|
||||
* 10. The BIOS update process ends with above nine steps. *
|
||||
* *
|
||||
* Notes: *
|
||||
* - You may see a POST error "0162: Setup data integrity check *
|
||||
* failure" after step 9.Press F1 to enter BIOS Setup Utility, *
|
||||
* and then press F10 to save your settings *
|
||||
*****************************************************************************
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 3. Flash Program Options *
|
||||
* *
|
||||
* To deploy this application, please open the Windows Command Prompt *
|
||||
* with Administrator privilege. Then run "xxxJYnnUSA.EXE -s -e" *
|
||||
* to unpack the installation files into the default path: *
|
||||
* "C:\SWTOOLS\FLASH\xxxJYnnUSA". After that, run "flash.cmd /quiet" *
|
||||
* to start the update process. If you like to customize the update *
|
||||
* options, please edit the wflash2.exe command line in the flash.cmd *
|
||||
* file to make changes to the flash program options. *
|
||||
* *
|
||||
* Note that "flash64.cmd" and wflash2x64.exe are provided to be used *
|
||||
* in an environment without WOW64 support such as Windows *
|
||||
* Preinstallation Environment (Windows PE) 64bit. *
|
||||
* *
|
||||
* Command options: *
|
||||
* *
|
||||
* wflash2.exe [option1] [option2] ... [optionX] *
|
||||
* *
|
||||
* [OPTIONS] *
|
||||
* /h Show help messages. *
|
||||
* /rsmb Preserve all SMBIOS structures. *
|
||||
* /clr Clear BIOS settings. *
|
||||
* /ign Ignore BIOS version check. *
|
||||
* /sccm Support SCCM deployment *
|
||||
* - see "Delaying Reboot in BIOS Update" below. *
|
||||
* /sn:nnnnnnn Update system serial number (up to 20 characters). *
|
||||
* /csn:nnnnnnn Update chassis serial number (up to 20 characters). *
|
||||
* /mtm:nnnnnnn Update machine type and model number (up to 25 *
|
||||
* characters). *
|
||||
* /tag:nnnnnnn Update system asset tag (up to 25 characters). *
|
||||
* /uuid The flash utility will generate an Universally *
|
||||
* Unique Identifier (UUID), replacing the one that *
|
||||
* is currently in the system. *
|
||||
* /logo:filename Change logo. The max supported size of logo file *
|
||||
* is displayed on the screen during the compressing. *
|
||||
* /pass:nnnnnnn Input current system password. *
|
||||
* /quiet Operating without physical presence. *
|
||||
* /autobin Used to support multiple systems from one BIOS *
|
||||
* folder. Before using this option, please copy the *
|
||||
* BIOS bin or rom files from the different BIOS *
|
||||
* packages into the one folder where the BIOS update *
|
||||
* is located. This one BIOS update folder could *
|
||||
* contain multiple BIOS images in addition to the *
|
||||
* existing flash program files including: *
|
||||
* imageFW.bin, imageFV.bin, imageM05.bin. *
|
||||
* This example would support M900, M800z, and M700 *
|
||||
* *
|
||||
* The following example shows how to update system asset tag number *
|
||||
* to "1234567" use command line: *
|
||||
* wflash2.exe /tag:1234567 *
|
||||
* *
|
||||
* The following example shows how to update bios and update system *
|
||||
* asset tag number by one command: *
|
||||
* wflash2.exe imagexxx.bin /tag:1234567 *
|
||||
* Or *
|
||||
* wflash2.exe /tag:1234567 /autobin *
|
||||
* *
|
||||
* The following example shows how to change the power-on logo. *
|
||||
* wflash2.exe /logo:myfav.bmp *
|
||||
* *
|
||||
* Notes: *
|
||||
* - A flash update image using these program options should be *
|
||||
* tested carefully before widespread usage. *
|
||||
* - wflash2x64.exe's options are the same as wflash2.exe *
|
||||
* *
|
||||
*****************************************************************************
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 4. Flashing Back to an Older Level of BIOS *
|
||||
* *
|
||||
* In order to flash back to an older level of BIOS, the following *
|
||||
* steps should be used to insure the latest flash utility is used. *
|
||||
* *
|
||||
* 1. Obtain the older level and latest level BIOS update programs *
|
||||
* from the Lenovo website. *
|
||||
* 2. Use the method described in section 3 to unpack the program into *
|
||||
* "C:\SWTOOLS\FLASH\xxxJYnnUSA". *
|
||||
* 3. Copy imagexxx.bin from the older BIOS update program folder, *
|
||||
* paste it and replace the same file in the latest level BIOS *
|
||||
* update program folder. *
|
||||
* 4. In the latest level BIOS update program folder, run flash.cmd *
|
||||
* to flash back to an older level BIOS. *
|
||||
* *
|
||||
*****************************************************************************
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 5. Delaying Reboot in BIOS Update *
|
||||
* *
|
||||
* The BIOS update process consists of two phases. The first phase *
|
||||
* happens in the OS. After the first flashing phase is complete, the *
|
||||
* system will automatically reboot to perform the secondary *
|
||||
* BIOS update phase. *
|
||||
* *
|
||||
* /sccm is designed for BIOS update deployment when the *
|
||||
* administrator wants to manually control the system reboot after first *
|
||||
* BIOS phase update has finished. With the parameter "/sccm", the *
|
||||
* system won't reboot immediately after applying the first phase of the *
|
||||
* BIOS update. *
|
||||
* The administrator must REBOOT/SHUTDOWN the system later to *
|
||||
* trigger the secondary phase of the BIOS update. *
|
||||
* *
|
||||
* Important Notes: *
|
||||
* *
|
||||
* 1. After the first phase of the BIOS update is complete, the *
|
||||
* administrator must REBOOT or SHUTDOWN the system to trigger *
|
||||
* the secondary phase. *
|
||||
* 2. The REBOOT mentioned in Note 1 will trigger the secondary phase *
|
||||
* immediately. It only works if Setup is set to boot in UEFI mode. *
|
||||
* It not works if Setup is set to boot the system in Legacy mode *
|
||||
* 3. The SHUTDOWN mentioned in Note 1 must be an actual *
|
||||
* S5 (System Power Off). The default shutdown behavior in *
|
||||
* modern OS (WIN8/WIN8.1/WIN10 etc.) is S4 (Hibernate). To change *
|
||||
* these modern OS shutdown behavior to S5, you need to turn off *
|
||||
* the "Fast Startup" from "Control Panel -> Power options". If your *
|
||||
* deployment software supports S5 shutdown, you can send a sleep S5 *
|
||||
* command by software to trigger the secondary BIOS update phase. *
|
||||
* If the system is not shut down using the S5 shutdown, the flash *
|
||||
* process will not continue, and will need to be restarted from *
|
||||
* phase 1. *
|
||||
* *
|
||||
* The following example shows how to use /sccm to implement first phase *
|
||||
* BIOS update with deployment software: *
|
||||
* *
|
||||
* flash.cmd /quiet /sccm *
|
||||
* *
|
||||
* The deployment software can unpack the installation files into the *
|
||||
* default folder without running the BIOS update program by using these *
|
||||
* parameters on the OS flash package: *
|
||||
* xxxJYnnUSA.exe /verysilent *
|
||||
* *
|
||||
* The deployment software can also unpack the installation files into *
|
||||
* the default folder and implement first phase BIOS update in quiet mode *
|
||||
* using these parameters on the OS flash package: *
|
||||
* xxxJYnnUSA.exe /verysilent /quietflash *
|
||||
* *
|
||||
* If the software package is already unpacked, you can run *
|
||||
* Quietflash.cmd to silently update the system firmware. *
|
||||
* *
|
||||
*****************************************************************************
|
||||
|
||||
|
||||
*****************************************************************************
|
||||
* 6. AMIDEWIN - AMI SMBIOS Editor for Windows *
|
||||
* *
|
||||
* AMIDEWIN.exe [option1] [option2] ... [optionX] *
|
||||
* *
|
||||
* Options: *
|
||||
* /SP "String" Update the System Machine Type and Model Number. *
|
||||
* /SS "String" Update the System Serial Number. *
|
||||
* /CS "String" Update the Chassis Serial Number. *
|
||||
* /SU auto Update the System UUID. *
|
||||
* /SV "String" update the System Brand ID. *
|
||||
* /CA "String" update the Chassis Asset Tag Number. *
|
||||
* *
|
||||
*****************************************************************************<br>
|
||||
</pre>
|
||||
</body>
|
||||
<style>
|
||||
.bodyStyle {
|
||||
background: white;
|
||||
color: black;
|
||||
margin-left: 20%;
|
||||
margin-right: 20%;
|
||||
font-size: large;
|
||||
}
|
||||
</style>
|
||||
</html>
|
||||
Reference in New Issue
Block a user