Ajout dela structure MDT dans Infra-LAB

projects/MDT/Scripts/BIOSConfig/Lenovo/ThinkCentreBiosConfigLegacyAll.ini

@@ -0,0 +1,87 @@
+Serial Port1 Address,3F8/IRQ4
+USB Support,Enabled
+USB Legacy Support,Enabled
+USB Debug Support,Disabled
+USB Enumeration Delay,Disabled
+USB Virtual KBC Support,Disabled
+Front USB Ports,Enabled
+USB Port 1,Enabled
+USB Port 2,Enabled
+USB Port 3,Enabled
+USB Port 4,Enabled
+Rear USB Ports,Enabled
+USB Port 5,Enabled
+USB Port 6,Enabled
+USB Port 7,Enabled
+USB Port 8,Enabled
+SATA Controller,Enabled
+SATA Drive 1,Enabled
+SATA Drive 2,Enabled
+SATA Drive 3,Enabled
+Configure SATA as,AHCI
+Hard Disk Pre-delay,Disabled
+Select Active Video,Auto
+Pre-Allocated Memory Size,32MB
+Total Graphics Memory,Maximum
+Onboard Audio Controller,Enabled
+Internal Speaker,Enabled
+Onboard Ethernet Controller,Enabled
+Boot Agent,PXE
+PXE IPV4 network stack,Enabled
+PXE IPV6 network stack,Disabled
+PCIe 16x Slot Speed,Auto
+PCIe 1x Slot 1 Speed,Auto
+PCIe 1x Slot 2 Speed,Auto
+EIST Support,Enabled
+Intel(R) Hyper-Threading Technology,Enabled
+Core Multi-Processing,Enabled
+Intel(R) Virtualization Technology,Enabled
+VT-d,Enabled
+C1E Support,Enabled
+C State Support,C1C3C6C7C8
+Turbo Mode,Enabled
+Intel(R) SGX Control,Software Controlled
+Current State,Disabled
+Dust Shield Alert,Disabled
+After Power Loss,Last State
+Enhanced Power Saving Mode,Disabled
+Wake on LAN,Automatic
+Wake from PCI Device,Primary
+Wake from Serial Port Ring,Primary
+Wake Up on Alarm,Disabled
+Startup Sequence,Primary
+Alarm Time(HH:MM:SS),00:00:00][Status:ShowOnly
+Alarm Date(MM/DD/YYYY),01/01/2016][Status:ShowOnly
+Alarm Day of Week,Sunday
+Sunday,Disabled
+Monday,Disabled
+Tuesday,Disabled
+Wednesday,Disabled
+Thursday,Disabled
+Friday,Disabled
+Saturday,Disabled
+User Defined Alarm Time,00:00:00][Status:ShowOnly
+Allow Flashing BIOS to a Previous Version,Yes
+Require Admin. Pass. when Flashing,No
+Windows UEFI Firmware Update,Enabled
+Require POP on System Boot,Yes
+Require POP on Restart,No
+Require Admin. Pass. For F12 Boot,No
+Smart USB Protection,Disabled
+Require HDP on System Boot,Auto
+TCG Security Device,Discrete TPM
+Security Chip 2.0,Enabled
+Secure Boot,Disabled
+Network Offline Locker Setup,Disabled
+Credential Guard,Disabled
+Chassis Intrusion Detection,Disabled
+Configuration Change Detection,Disabled
+Password Count Exceeded Error,Enabled
+CSM,Enabled
+Boot Mode,Legacy Only
+Boot Up Num-Lock Status,On
+Startup Device Menu Prompt,Enabled
+OS Optimized Defaults,Enabled
+Primary Boot Sequence,USB FDD:USB KEY:M.2 Drive:SATA 1:SATA 2:SATA 3:Network 1:USB HDD:USB CDROM:Other Device;[Excluded from boot order:Network 2:Network 3:Network 4]
+Error Boot Sequence,Network 1:M.2 Drive:SATA 1:SATA 2:SATA 3:Other Device;[Excluded from boot order:Network 2:Network 3:Network 4:USB FDD:USB HDD:USB CDROM:USB KEY]
+Automatic Boot Sequence,SATA 1:M.2 Drive:Network 1:SATA 2:SATA 3:Other Device;[Excluded from boot order:Network 2:Network 3:Network 4:USB FDD:USB HDD:USB CDROM:USB KEY]