Ajout dela structure MDT dans Infra-LAB
This commit is contained in:
@@ -0,0 +1,87 @@
|
||||
#TYPE Selected.System.Management.Automation.PSCustomObject
|
||||
"Setting","Value"
|
||||
"Serial Port1 Address","3F8/IRQ4"
|
||||
"USB Support","Enabled"
|
||||
"USB Legacy Support","Enabled"
|
||||
"USB Enumeration Delay","Disabled"
|
||||
"Front USB Ports","Enabled"
|
||||
"Rear USB Ports","Enabled"
|
||||
"USB Port 1","Enabled"
|
||||
"USB Port 2","Enabled"
|
||||
"USB Port 3","Enabled"
|
||||
"USB Port 4","Enabled"
|
||||
"USB Port 5","Enabled"
|
||||
"USB Port 6","Enabled"
|
||||
"USB Port 7","Enabled"
|
||||
"USB Port 8","Enabled"
|
||||
"USB Port 9","Enabled"
|
||||
"SATA Controller","Enabled"
|
||||
"SATA Drive 1","Enabled"
|
||||
"SATA Drive 2","Enabled"
|
||||
"SATA Drive 3","Enabled"
|
||||
"Configure SATA as","AHCI"
|
||||
"Hard Disk Pre-delay","Disabled"
|
||||
"Select Active Video","Auto"
|
||||
"Onboard Audio Controller","Enabled"
|
||||
"Internal Speaker","Enabled"
|
||||
"Onboard Ethernet Controller","Enabled"
|
||||
"PXE Option ROM","Enabled"
|
||||
"PXE IPV4 Network Stack","Enabled"
|
||||
"PXE IPV6 Network Stack","Disabled"
|
||||
"ASPM Support","Auto"
|
||||
"PCIe 16x Slot Speed","Auto"
|
||||
"PCIe 1x Slot 1 Speed","Auto"
|
||||
"PCIe 1x Slot 2 Speed","Auto"
|
||||
"EIST Support","Enabled"
|
||||
"Core Multi-Processing","Enabled"
|
||||
"Intel(R) Virtualization Technology","Enabled"
|
||||
"VT-d","Enabled"
|
||||
"C1E Support","Enabled"
|
||||
"C State Support","C1C3C6C7C8"
|
||||
"Intel(R) SGX Control","Software Controlled"
|
||||
"Intel(R) SIPP Support","Enabled"
|
||||
"Dust Shield Alert","Disabled"
|
||||
"After Power Loss","Last State"
|
||||
"Enhanced Power Saving Mode","Disabled"
|
||||
"Smart Power On","Enabled"
|
||||
"ICE Performance Modes","Better Acoustic Performance"
|
||||
"ICE Thermal Alert","Enabled"
|
||||
"Wake on LAN","Automatic"
|
||||
"Wake from Serial Port Ring","Primary"
|
||||
"Wake Up on Alarm","Disabled"
|
||||
"Startup Sequence","Primary"
|
||||
"Alarm Time(HH:MM:SS)",""
|
||||
"Alarm Date(MM/DD/YYYY)",""
|
||||
"Alarm Day of Week","Sunday"
|
||||
"Sunday","Disabled"
|
||||
"Monday","Disabled"
|
||||
"Tuesday","Disabled"
|
||||
"Wednesday","Disabled"
|
||||
"Thursday","Disabled"
|
||||
"Friday","Disabled"
|
||||
"Saturday","Disabled"
|
||||
"User Defined Alarm Time",""
|
||||
"Allow Flashing BIOS to a Previous Version","Yes"
|
||||
"Require Admin. Pass. when Flashing","No"
|
||||
"Windows UEFI Firmware Update","Enabled"
|
||||
"Require POP on System Boot","Yes"
|
||||
"Require POP on Restart","No"
|
||||
"Require Admin. Pass. For F12 Boot","No"
|
||||
"Smart USB Protection","Disabled"
|
||||
"Require HDP on System Boot","Auto"
|
||||
"TCG Security Device","Discrete TPM"
|
||||
"Security Chip 2.0","Enabled"
|
||||
"Secure Boot","Disabled"
|
||||
"Network Offline Locker","Disabled"
|
||||
"Computrace Module Activation Setting","Enabled"
|
||||
"Device Guard","Disabled"
|
||||
"Chassis Intrusion Detection","Disabled"
|
||||
"Configuration Change Detection","Disabled"
|
||||
"Password Count Exceeded Error","Enabled"
|
||||
"CSM","Enabled"
|
||||
"Boot Mode","Legacy Only"
|
||||
"Boot Up Num-Lock Status","On"
|
||||
"OS Optimized Defaults","Enabled"
|
||||
"Primary Boot Sequence","SATA 1:SATA 2:SATA 3:Network 1"
|
||||
"Error Boot Sequence","Network 1:M.2 Drive 1:PCIe4X_1 Drive:PCIe16X_1 Drive:SATA 1:SATA 2:SATA 3:Other Device"
|
||||
"Automatic Boot Sequence","M.2 Drive 1:PCIe4X_1 Drive:PCIe16X_1 Drive:SATA 1:Network 1:SATA 2:SATA 3:Other Device"
|
||||
|
Reference in New Issue
Block a user